c# .net core barcode generator

c# .net core barcode generator

c# .net core barcode generator

L2TP/IPSec connections, unlike those of PPTP, require computer authentication in addition to user authentication. Computer authentication is performed first; this pro cess occurs during all L2TP/IPSec connection attempts between remote access clients and servers. After the tunnel endpoints are authenticated and a secure channel is estab lished between the client and the server, user authentication follows. User authentica tion over L2TP/IPSec VPN connections occurs by means of any of the same set of authentication protocols that are used for PPTP and dial-up connections. Once user authentication is complete, user authorization follows. Computer Certificates and L2TP/IPSec For most L2TP-based VPN connections, com puter authentication is performed by means of a certificate infrastructure. To successfully implement this type of VPN, you must install computer certificates issued by the same certificate authority (CA) on each VPN client and VPN server. If you are using a Windows Server 2003 enterprise CA as an issuing CA, you should configure your Active Directory domain for autoenrollment of computer certificates by using the Computer Configuration group policy. Through this method, each computer that is a member of the domain automatically requests a computer certificate when the Computer Configu ration group policy is updated.

The following questions are intended to reinforce key information presented in this lesson. The questions are also available on the companion CD if you prefer to review them in electronic form.

G04tb10 [Messenger icon in system tray]

Performing these operations in parallel brings a great performance benefit The downside to RAID-0 is that if one of the disks that comprise the striped volume fails, all data on that volume is lost Data should be hosted only on those volumes that need to be read and written quickly but that do not require fault tolerance The second way to increase the read/write speed of disks is to implement disk striping with parity, which is also known as RAID-5 The benefit of this method over disk strip ing is that the method is fault-tolerant If one of the disks that comprise the RAID-5 vol ume is lost, the data can still be recovered by using the parity information stored on the other disks RAID-5 is the safest way to increase the read/write performance of disks.

8-15

The technique is easy to implement in the disk management console with three or more dynamic disks The final way of increasing the read/write speed of disks is to make sure that the files stored on them are relatively free of fragmentation Fragmentation naturally occurs on hard disk drives as files are written and deleted Because hard disks allocate free space as it becomes available, a newly written file may be stored at disparate locations across the hard disk drive The less contiguous a file is on the hard disk drive, the longer it takes to be read or written Defragmentation is the process by which files are rearranged on the hard disk so that they are contiguous rather than fragmented This is performed either by using the Disk Defragmenter console or by using the DEFRAG command-line utility..

File And Printer Sharing For Microsoft Networks Allows other computers to access file and print resources on your computer. QoS Packet Scheduler Helps provide a guaranteed delivery system for network traffic, such as Transmission Control Protocol/Internet Protocol (TCP/ IP) packets. Internet Protocol (TCP/IP) Allows your computer to communicate over local area networks (LANs) and wide area networks (WANs). TCP/IP is the default networking protocol.

The roles that you install on a computer running Exchange Server 2007 are determined by a set of needs. For example, if your organization is going to use only traditional e-mail and does not intend Exchange to meet voice-messaging or fax storage roles, you need not install the Unified Messaging server role. Part of the 70-236 exam involves being able to decide which roles to install on an Exchange Server 2007 computer given a specific set of organizational requirements. The first part of this lesson will provide you with the information that will help you make such a recommendation. In the second part of the lesson, we will examine the configuration of clustering, load balancing, and the steps that you should take to protect against spam and viruses. When determining which roles to deploy on a computer, remember that each Active Directory site in which clients will access Exchange resources requires at least one Mailbox server, a Hub Transport server, and a Client Access server.

disks and, by copying the user data across, he has added space to each of the shares. Rooslan has achieved the first secondary goal by mounting the disks as the user data folder. Under the current shared folder hierarchy, there is no need to introduce extra shared folders. The files copied will not retain their NTFS permis sions, so the third secondary goal will not be achieved. Nowhere has it been men tioned that any type of fault tolerance has been used; therefore, the second secondary goal has not been achieved.